10X Garden Landscape Light Quick Connectors Waterproof Joiner Outdoor Lighting

Description 

• Lighting Solutions - Patented 
• Waterproof Quick Connectors- Model :PL-QC10
• Designed especially for use with 12-24V AC/DC garden lights
• Garden and Landscape lights use super safe 12-24V AC or DC power 
• Until now , you would need to solder your join and seal them
• Now Plasstronics introduces the PL-QC10
• These Quick Connectors use a patented sealing technology to provide you a good waterproof seal
• We have included in the pics step by step instructions on how to use htem
• No need to solder wires, simply connect the QC10 to the back bone wire as shown in the instructions 
• and then connect to the light wires via the patented screw lock mechanism
• A host of silicone seals ensure that the wire is protected from the elements and can easily be buried once connected
• It should take you only minutes to connect each light and get your garden looking fantastic
• Suitable for a variety of backbone wires
• and will work with all our Plasstronics lighting range 
• You will receive 10X connectors

See step by step picture instructions on the photo 

• Step 1. Unscrew the base and remove the top green waterproof patch
• Step 2  Split the main backbone wire into 2 separate wires 
• Step 3  Insert one wire into the base and then inset the green waterproof patch ontop
• Step 4 Screw the Copper pin joint into the base ( this will pierce the wire )
• Step 5 tighten to get a good seal with the waterproof patches   
• Step 6 -   Strip approx. 1 cm of wire from pair of wires from the light
• Step 7 -   Unscrews the Cap
• Step 8  Remove tightening clip ( green waterproof ring will unscrew with it)
• Step 9  - Insert the stripped wire in through the cap and waterproof ring   and in through the tightening cap and into the waterproof gasket
• Step 10  Screw the tightening ring by hand as tight as possible    ( this will secure the wire from the light into the connector )